ZD100 pressure meter with digital displayer

ZD100 series pressure with digital displayer are based on advanced composite micro silicon solid state sensor technology, micro processor technology, super low power design, and power supply by battery. The meter has simple and elegant appearance, accurate and reliable measurement, direct and clear display, and some other advantages such as anticorrosive, enduring vibration, impacting proof, long life. ZD100 can measure gauge pressure, absolute pressure, and vacuum pressure，and has many mounting types to choose. ZD100 is suitable for using in measurement on line in fields of petrochemical, power generated, metallurgy, etc.

Features

　　* high accuracy

　　* long term good stability

　　* anti corrosive and humid proof

　　* 3 times overload capacity

　　* install easily

　　* both negative and positive pressure can be measured

　　* embedded battery and need no outer power supply
 

Technical performance

　　Range: gage pressure (G) 0-0.1kPa~60MPa

　　Negative pressure (N) -100kPa~3500kPa

　　Absolute pressure (A) 0~35kPa~3500kPa

　　Differential pressure (D) 0-0.1kPa~3500kPa

　　Span unit: optional user span and pressure units

　　Accuracy: 0.2%; 0.5%

　　Medium: liquid, gas, steam

　　Overpressure limit: 1.5~3 times of user’s range, please referring details in selection table

　　Compensation temperature: 0℃~70℃

　　Environment temperature: -20~70℃

　　Medium temperature: -40~85℃

　　Temperature coefficient: 0.15%/10℃ in the range of temperature compensation, suitable for zero and full span.

　　Stability: ±0.2% FS/year

　　Work power supply: ER14505, 3.6V/2.4Ah, one lithium battery with life of 3~5 years

　　Pressure responding: 2s in zero state; 1s in measurement state (optional)

　　Start time: 2senconds, no preheat

　　Position effect: zero position change ≤0.1% under the condition of deviation from 90°in any direction

　　Vibration effect: <0.1%FS under the condition of 20~2000Hz for 10g peak value

　　Humidity effect: no effect in the range of 0~95% relative humidity

　　Shell material: die casting aluminum (epoxy spraied)

　　Protection level: IP 65

　　Field indicator: 4 bit LCD display

　　Process connection: M20×1.5 or 1/2″NPT male thread

　　Wetted part: stainless steel 1Cr18Ni9Ti

　　 316L stainless steel

　　 O ring with fluorine rubber material

　　Filling fluid: silicon oil

　　Size: 80 ×110 ×150

　　Weight: 1kg